Products

ESE LPS

For markets where NF C17-102 compliance is required, we offer the System 1000. More commonly known as an ESE system, it’s manufactured and tested to meet this design guide, and is often advantageous for applications in low-lying, sprawling structures where conventional methods may be difficult.

If you can’t find your specific product requirement, please call us on 07 3734 7159, or send an email to sales@ppindustries.com.au

EARLY STREAMER EMISSION TERMINAL (Stainless Steel 304L (EN 1.4306))

Part Number ∆T Temp. Ø
SI25I 25 µs 120 °C Max 28 mm
SI40I 40 µs 120 °C Max 28 mm
SI60I 60 µs 120 °C Max 28 mm

EARLY STREAMER EMISSION TERMINAL (Stainless Steel 316L (EN 1.4404))

Part Number ∆T Temp. Ø
SI60I316 60 µs 120 °C Max 28 mm

ESE MASTS (Stainless Steel 304L (EN 1.4306))

Part Number Product TS L
SIM28A2 Upper Mast Section M25 2,000 mm
SIM33B2 Mid Mast Section M25 2,000 mm
SIM33B3 Mid Mast Section M25 3,000 mm
SIM40C2 Lower Mast Section M25 2,000 mm
SIM40C3 Lower Mast Section M25 3,000 mm

ESE MASTS (Stainless Steel 316L (EN 1.4404))

Part Number Product TS L
SIM28A2316 Upper Mast Section M25 2,000 mm
SIM33B2316 Mid Mast Section M25 2,000 mm
SIM33B3316 Mid Mast Section M25 3,000 mm
SIM40C2316 Lower Mast Section M25 2,000 mm
SIM40C3316 Lower Mast Section M25 3,000 mm

ESE MAST BASE (Stainless Steel 304L (EN 1.4306))

Part Number H W D
SIMBASE2840 153 mm 200 mm 200 mm

ESE MAST BASE (Stainless Steel 316L (EN 1.4404))

Part Number H W D
SIMBASE2840316 153 mm 200 mm 200 mm

ESE MAST BRACKET (Stainless Steel - Hot-Dip Galvanized)

Part Number Ø H L
ALOF1GS 28.0 – 69.9 mm 120 mm 280 mm

Products listed on our site are not exhaustive. If you can't find your specific product requirement, please call 07 3734 7159, or email sales@ppindustries.com.au

Get in touch with team PPI



    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.